Our range of water leak detection systems have been specifically designed to identify and on some products turn off the water supply when a leak is detected. All systems can be used to detect liquid leaks from equipment or areas containing water such as Office Tea points, Water pipes, Bathrooms, Wet Rooms, Kitchens, Server Room or any area or equipment containing water.

Read more

Our leak detection systems that can monitor up to 16 different leak zones, and will give you audible and visual warning signs when it’s time to spring into action and get that leak fixed. From floods on plant room floors to leaks in a server room, our systems are designed and built in-house to ensure the correct system is used for the right environment.

Some Applications for our Water Leak Detection Systems


Can’t see a solution to your application? Please call us as we can modify standard products.

Please don’t hesitate to contact us if you would like more information about our products

BREEAM Water Leak Detection Systems

BREEAM Water Leak Detection Systems

Single Zone Water Alarm Type LD1 and LD1V

Designed with  office refurbishment and home in mind, the LD1V water leak detection system detects water leaks that can occur at tea points and areas where hot drinks are prepared, as well as in kitchens areas, around vending machines and in a whole variety of small areas.

Read More

One and Two Zone Alarm Type LD2

Designed to raise an alarm when water touches the leak detection cable or spot probes. One & Two zone water leak detection alarm with audible warning, visual indication, Mute alarm push button, alarm and fault relays for onward signalling and optional battery backup.

Read More

One and Two Zone Alarm with Water Shut off Valve Type LD2V

One and two zone water leak detection alarm with 230VAC supply to shut off water valve. This utilises a valve shut off override switch, visual indicators with audible warnings, a mute alarm push button, alarm with fault relays for onward signalling.  This product also has an optional battery backup.

Read More

Three & Four Zone Equipment Type LD4

Designed to raise an alarm when water touches the leak detection cable or spot probes. Three & Four zone water detection with audible warning, visual indication, Mute alarm push button, alarm and fault relays for onward signalling and optional battery backup.

Read More

Five to Eight Zone Alarm type LD8

The LD8 has been designed to monitor up to eight independent zones in critical areas for water leaks via linear detection cables or spot sensors. Any number of spot sensors or a maximum of 50 metres of linear water detection cable can be connected to each zone.

Read More

4 to 64 Zone Water Detection Alarm Type LD64

Designed to monitor a large number of areas for water leaks using a 4 core data cable to between 1 and 16 remote outstations. When water or a fault is detected by one of the outstations, the controller displays the type of alarm (“Water detected” or “Zone fault”) and location (“Floor 4 male toilets”) along with an audible warning.

Read More

Combined Water Detection & Room Over Temperature Alarm Type CWT

The CWT alarm contains both a Room over temperature alarm and a water detection alarm.

The unit has been specifically designed to monitor critical areas such as a small server room, were both over temperature and a water leak would cause operational problems.

Complete with visual and audible indication, the unit can be connected to a Building Management System, remote beacon or send a Text message via the addition of our text messaging unit as shown in the “optional equipment” tab below.

Read More

Optical Alarm Type OLS

One & Two zone optical detection of water leaks with audible warning, visual indication, Mute alarm push button and alarm relay for onward signalling. Both floor standing or wall mounted sensor are available. Used for drip trays bunded areas or dirty areas where detection cable would get damaged.

Read More

Drip Tray Water Leak Detection Sensor for air conditioning or water pipe drip trays type DTS

The sensor has been designed to detect the presence of water in drip trays and energise an internal relay to provide a volt free contact signal to existing alarm systems. The unit has no external metal parts and uses an optical sensor to detect the presents of water and therefore is not susceptible to false alarms from contact with the metal drip tray or other sensors via earth. Being IP 66 rated, the sensor can be submerged in water without any detrimental effect. Sensors can be connected together to give a common alarm within an area  or connected individually to provided exact location of a leak.

Read More

Sensor with Leak Detection Cable Type RWM

Water detection sensing module with volt free relay contact for BMS or existing alarm system, sensitivity adjustment and water detection cable designed to surround potential water sources.

Read More

Water Detection Cable

Our water leak detection cable (sometimes known as ‘detection rope’) is designed specifically to detect water anywhere along it’s entire length. It works with all CMR products but can also be used on other manufacturers equipment.

We can supply in lengths from 5 metres to cable drums of 450 metres.

Read More

We use cookies, just to track visits to our website, we store no personal details. ACCEPT COOKIES What are cookies?