Water Leak and Room High Temperature Alarm type CWT2-2

 

CMR Electrical have lunched an updated version of their combined water leak detection and room over temperature alarm system. The new unit known as the CWT-2,  will replace the old but well established CWT system that used standard thermostats, had no temperature display and just LED lamp indication lamps. The new unit has been designed to include a number of features requested over the years by our customers as well as a number of optional features as outline below. The CWT system was introduced to the market to give a cost effective solution for small server rooms against damage and down time caused by water leaks and high room temperature. Whilst the majority of small server rooms don’t contain a source of water, we have had several reports of damage caused by water getting into the server room from sources outside such as office tea points, vending machines or plant room equipment mounted on the floor above the server room. Temperature damage to serves can be caused by faulty or underrated air conditioning. Advanced warning that the room temperature is about to go critical can help prevent server damage by allowing personnel to take remedial action to reduce the room temperature. For unmanned server rooms, the addition of our SMS/Email unit will send text messages and or emails to all personnel involved with the server room when a water leak or high room temperature is detected.

 

 

 

 

Standard Features

  • Remote water detection sensor up to 100m away from the main alarm unit
  • Remote temperature sensors up to 100m away from the main alarm unit
  • Large back lit alpha numeric display
  • Current ambient temperature
  • Tamper proof temperature alarm adjustment from 0 to 50°C
  • Except for mains power, all terminals are of the plug and socket type
  • On board audible warning device to alert local operators of a problem
  • Alarms latched until Mute operated to give indication of temperature fluctuations
  • Two common alarm relay contact for onward signalling to a BMS or other systems
  • Mains Powered and power fault monitoring via the Common alarm BMS contact

Optional Features

  • Individual zone alarm relay contacts for onward signal to a BMS
  • Common alarm output to a flashing Beacon
  • Common alarm output to a flashing Beacon and Mutable Sounder
  • SMS text messaging or Email

 

 

 

 

The system can also be used in other applications including plant rooms, cool rooms, blood banks and small document storage rooms. In fact the unit can be used in any environment where both a water leak or high room temperature can cause damage to equipment, services or documents.

 

 

 

 

 

For more information Get in touch with us here at CMR Electrical, so we can advise you on the best water leak detection system for your application.

 

We use cookies, just to track visits to our website, we store no personal details. ACCEPT COOKIES What are cookies?