Designed to detect major water leaks within a building, an area within a building and if required the mains water supply between the utility companies meter and the building’s boundary. Our system’s have also been designed to achieve the requirements of BRE Environmental Assessment Method (BREEAM) WAT02 and WAT03 allowing one credit that’s available for a reduction in the impact of leaking water that might go undetected.
Designed to meet the requirements of BREEAM WAT02 and WAT03 water leak detection accreditation. BLDA1-2 detects major leaks within the building. The system is fully user programmable with output alarms and onward meter pulses for external water flow metering by a Building Management System.
Available in 1/2″ (15mm) and 3/4″ (22mm) sizes, the WLW controller has been manufactured to comply with the requirements of BREEAM WAT03 water leak detection accreditation, and is specifically designed to help protect houses and flats from water leaks, burst pipes or unintentional use of water, i.e., garden hose being left on too long. This is achieved by monitoring the flow of water entering the building, raise an alarm and turn off the water supply if any unusual water patterns are detected, thereby minimising the extent of the damage to the building and its contents. The system can also be fitted with a remote water detection cable or spot probe for areas where appliances use mains water.
Designed to meet the requirements of BREEAM WAT02 and WAT03 water leak detection accreditation. BLDA-2 system looks for major leaks within the building as well as the supply pipe feeding the building known as the boundary.The system is fully user programmable with output alarms and onward meter pulses for external water flow metering by a Building Management System.
Designed to turn off the water flow during non-occupied periods in areas such as changing rooms, WC, or any wet area thereby limiting the risk of water damage or wasted water due to leaks and cistern overflow.
